1

At work I have a small spiral bound notebook that I take to meetings for notes and phone numbers and such. The notebook has lots of blank pages left in it so I don't want to get a new one, but with all the carrying around the top cover has torn off of the front, leaving nothing to protect the contents. I have the old cover but all its perforations along the top are torn through.

Is there a way to reattach the cardboard cover to the notebook or else a way to attach a new cover so I can continue to use this notebook?

  • Cut off the binding, get a big three hole punch and a binder? Or just remove the spiral and sew it instead through the holes with whatever you want as the cover. Or maybe remove the spiral, reinforce the busted cover with duct tape or something, then reinsert the spiral. – Captain Obvious Mar 11 '17 at 6:39
  • Not a fix for the cover, but something that may help prevent any replacement tearing off: the addition of a rubber band, when I replaced the back cover of a notebook, held it shut and helped prevent the covers tearing off. – owjburnham May 23 '18 at 16:49
  • @owjburnham Yeah I thought of that too and it's kept the notebook at least useable. probably the best solution even if not perfect. Thx – PJNoes May 23 '18 at 17:13
2

I am having a similar issue - front cover is coming off but the back cover is in tact. My plan is to remove the front cover, flip the back cover aroud on the spirals so that it is before the front page, and glue a piece of cardboard (either the former front cover, or a different scrap) to the back page, making a new back cover (and losing use of the backside of the last page of the notebook).

  • I like the idea... Have you actually tried it? – L.B. Mar 27 '18 at 20:09
  • Tried. Can confirm that this works. – owjburnham May 23 '18 at 16:50
1

You could cut out a new cover with scissors or a paper cutter (use something sturdy- plastic covers work much better than cardboard). Some binders have suitable plastic.

Use double-sided tape to stick two strips of masonite to the edge of the cover. Measure out carefully where the holes should be (a notebook I have to hand has 39 of them). You could use the good cover as a bit of template or to check your measurements once you free it.

Use an electric drill (or drill press if you have one) to drill through each hole location (in the one I have the holes would be about 3/16" in diameter. You'll need something like a 2x4 under the bottom to keep from drilling into the table.

Peel off the masonite, clean off any adhesive residue and you should have a new cover with a neat row of holes that match the original holes.

Use a pair of pliers to bend the dog leg at the end of the spiral and unscrew the spiral spring. Reassemble with the new cover and bend the spiral back to lock it in.

0

You can use a binder by taking off the spiral and, if your notebook has three hole punches on each page, just insert it in the binder. If you a composition book or something that does not have hole punches, then it will be a long day for you.

0

Inspired by your situation, I decided to repair the cover of my huge spiral bound notebook which had torn along the perforations splitting it into two pieces. It sounds like the same thing that happened to you. It worked out great and didn't take very long.

You'll need pliers, strong pressure-sensitive tape, a small hole punch to fit the notebook holes. I got a rotary paper punch at a stationery store for a few dollars. The 1/16 inch (1.5mm) size was perfect for my notebook. You could even use a needle to make the holes in the tape.

Here's how I repaired mine step-by-step:

  1. Use a paper clamp on either end of the binding next to the spiral so the paper block pages remain aligned and won't come free.
  2. Unbend the end of the spiral so that you can twist it free, out of the row of spiral binding holes.
  3. Place the broken parts of the cover together so that the torn halves' holes align with each other.
  4. Tape both sides (front and back) of the cover with strong tape. I used thick crystal-clear packing tape and wrapped it around the edge—half along the front and half along the back. Masking tape or any paper-based tape won't last very long in use. Make sure that the kind of tape you use bonds with the cardboard card cover.
  5. Use a hole punch to open the holes covered with the tape.
  6. Align the cover with the paper block and clamp the assembly so it remains firm
  7. Twist the spiral back into the paper block holes to hold the notebook together.
  8. Re-bend the end of the spiral wire so that it remains secure.

While doing this project, you might decide to add divider, move some pages around, or even add some different kind of paper such as graph paper for other projects.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.