6

I have been using my current toothbrush for only about a month and it has already started developing deposits of solidified toothpaste on it(a significant amount). (It looks sort of like chewing gum stuck on it).

It is extremely difficult to remove manually due to the small spacings between the bristles. Only a very small amount can come out if you try to do manually (most of it stuck to the bottom of the tooth brush I believe). It also doesn't come out with running water.

Is there a way I can remove it? I think my toothbrush isn't cleaning as effectively due to this (not sure though).

  • 5
    You may be using too much toothpaste. Brushing action cleans away dental plaque—not toothpaste. According to most dentists you do not even need toothpaste for effective dental hygiene. Besides, dental floss does a better job between your teeth—not a brush—certainly not toothpaste in any flavour. – Stan Nov 18 '19 at 14:49
  • 2
    Put the toothpaste in your mouth first. Much more effective distribution. – Matthias Dailey Nov 19 '19 at 3:05
  • 5
    The quantity of toothpast shown in advertising is commercially misleading. With such a quantity you should be able to brush your teeth 3 to 5 times... – Laurent S. Nov 19 '19 at 12:44
  • 2
    You only need a "pea" sized amount of toothpaste. – MrWhite Nov 19 '19 at 15:54
  • 1
    Not sure why this is considered a life hack. Most people rinse their toothbrushes. PRevention is better than cure. – gburton Nov 19 '19 at 16:50
16

Throw it away and start with a new one.

To prevent the build-up of toothpaste and other stuff on the brush, rinse it thoroughly after use and stand it so it can drain freely, like this.

enter image description here

  • 9
    +1. The stress is: really clean it after you use it. I never had any such problem in my life, using this "technique". – virolino Nov 18 '19 at 11:47
  • 1
    Stand it like that and then look in the cup you stand it in, a couple of months later - ugh! :) – Caius Jard Nov 19 '19 at 0:28
  • 3
    @user600016: to be sure you do a good cleaning, run your (clean) finger through the hairs of the brush - that is what I do. Do not assume that the flowing water would do an acceptable job. – virolino Nov 19 '19 at 5:53
  • 2
    @user600016 You're doing something wrong. I have never had anything like the problem you describe and I don't rinse my toothbrush thoroughly at all. I just hold it under the running tap for a couple of seconds. I suspect you're using much too much toothpaste, and possibly on a dry brush. – David Richerby Nov 19 '19 at 10:52
  • 2
    @CaiusJard Cup goes in the dishwasher every couple of weeks. – user3067860 Nov 19 '19 at 15:24
7

Similar to SurpiseDog's answer, I find that very hot (tea brewing temperature) works very well. Simply fill a mug with the water and place the toothbrush in head down. I let it sit for a minute and then brush my teeth with no additional paste. If there is still paste, back into the hot water. Do this three or four times and the tooth brush will look brand new.

Also, you should only put about a pea sized amount of toothpaste on a toothbrush; more than that contributes greatly to the issue you are experiencing.

Please note, if the toothbrush is heavily worn, you should just replace it anyway.

5

Hold the toothbrush under boiling water and that gunk should come right off.

This is also a great way to disinfect a toothbrush as the hot water will kill any bacteria.

2

Put it in the dishwasher? That might work if its not on a too hot setting

  • Dishwashers max out at 75 degrees C, so this should be okay. - If the toothbrush can survive boiling water at 100C, it should survive the dishwasher okay. As this answer is the simplest, easiest and most effective, I think the OP should accept it. – SurpriseDog Nov 19 '19 at 16:15

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.