6

I find that pulling a sheet of plastic wrap out of the box can be incredibly tricky.

  1. The plastic sticks to itself, so it takes a bit of force to pull it apart.

  2. The force to pull the plastic off the roll is enough to pull the entire tube out of the box.

I can't seem to hold it in a way that keeps the roll inside the box, while allowing me to pull a sheet of the plastic out with enough force to pull it from the roll. If I'm holding onto the roll, then it can't roll to let plastic out.

Is there something else I can do?

3 Answers 3

8

Most boxes of rolled kitchen items, like plastic wrap and aluminum foil, come with tabs on the box that you can press inwards.

If you press both tabs inward, they'll be inside the cardboard tube, holding it inside the box and working like an axle to allow it to roll, so that you can pull on the plastic wrap with a pretty reasonable amount of force.

source

If for some odd reason your box doesn't have these pre-cut tabs, you can easily take a knife or some scissors and cut them yourself.

0

I learned a lot when working in a commercial kitchen, like a restaurant or cafeteria. The boxes of the wrap are designed to:

  1. hold the roll, the box ends fold in, which means-it 'rolls', and
  2. to cut the wrap: (cutter) sharp serrated metal edge on the lid flap of the box.

So, this means: With the end tabs pushed in and the box lid closed, you will pull an amount of wrap loose from (roll) to cover the subject. Set the centered subject on the wrap piece on the counter (using the box to keep it straight and from sticking to itself), then cover the product completely with the wrap, using both hands. Still using the box of wrap while attached to the covered subject, tear - using lid metal edge (cutter) - the sheet of wrap with one hand while holding the covered subject with other your hand. Finish sealing the wrapped subject - the purpose of the wrap is to stick to itself completely. Use parchment paper, or something else, if you don't want the wrap to stick.

Jenni74; SMSU, HRA, B.S. 1997; working-to-eat- experienced, also.

0

Ditto on the above answers! To add to the wrap clinging to itself when trying to cut off selected wrap, with bare arm lay your elbow on end close to your body then lay arm across while using the palm of hand (same arm ) to hold the other end , then press downward with elbow and follow it till separation is complete. Folding it onto the covered item . 😋

New contributor
Mark Layton France is a new contributor to this site. Take care in asking for clarification, commenting, and answering. Check out our Code of Conduct.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.