9
votes
What can be used ( instead of / for ) a plastic straw?
My favorite solution is actually no tool - having observed the surge of drinks that get served with a straw, I still remember when it was perfectly acceptable to drink either out of a glass, cup or ...
- 3,195
8
votes
Reshape plastic containers
This definitely exist, It is called Precious Plastic, it is a project started by Dave Hakkens. It is a collection of Open-Source machines designed for recylcing and reusing thermoplastics.
There are ...
- 565
5
votes
Remove an imprinted logo from an electric device
Maybe spray paint black or use nail polish to black it. If it's sticking out, maybe some fine sand paper, but that will easily make scratches on your device
- 151
5
votes
How to repair a dent on my water bottle?
I don't know how tall the water bottle is but you can easily push the dent out using the handle of a wooden spoon, it's thin enough to fit through the mouth of the bottle yet stiff enough to apply ...
- 1,188
5
votes
How can I repair cracked LDPE without a plastic welder?
Styrene/butadiene copolymers such as Goop bond somewhat to polyethylene, and are flexible and elastic, though they harden with years of exposure to light and air.
Polyethylene "candles", such as P-...
- 5,993
5
votes
Accepted
How to repair and clean traffic cones?
Here is my current solution. First of all, I cut every old and dirty reflective sticker with a utility knife:
Now it looks like that:
I used a green roughed dish sponge with Cif Cream to rub, and ...
- 267
5
votes
How to separate plastic grocery bags?
If I'm in the produce section, I touch a piece of wet produce to moisten my finger tips and open the produce bag.
If I'm checking out, I either touch some moist produce in my cart, or hold a small ...
- 51
5
votes
Checking microwave proof containers
The standard method when I was young, and microwave ovens were new to the consumer market (i.e. had only recently started costing less than a used car), the standard test of any cookware was to fill a ...
- 9,790
4
votes
How to separate plastic grocery bags?
I'm surprised no one mentioned this. I know this is not a direct answer to your question, but another answer is to take your own bags! I know, I know, but hear me out - if the issue is simply that you ...
- 443
4
votes
How to repair silicone rubber?
I saw in a YouTube video recently (from King of Random, he was making a mold of a roast chicken) that casting silicone doesn't stick to anything except silicone rubber (he discovered the exception at ...
- 9,790
3
votes
Accepted
How can I repair cracked LDPE without a plastic welder?
I'm not exactly sure what a "plastic welding kit" is, but I've made almost identical repairs with a Benzomatic propane torch (the blue can). The trick (in my case) was getting the pieces lined up ...
- 156
3
votes
How can I repair cracked LDPE without a plastic welder?
I have repaired similar plastic items (in my case, a compost-holder) by pre-drilling holes and driving woodscrews into a suitably shaped piece of wood somewhere behind it. Your picture is not too ...
- 294
3
votes
How to repair and clean traffic cones?
Cleaning tip
In my world, if something was really dirty we used White spirit (also known as Mineral spirit in the US) which took care of most dirt in various forms (including oil, paint, different ...
- 6,984
3
votes
What are these black spots in Plastic lids
It may be fungus. If so, soaking it in vinegar for about 15 minutes and then washing it as regular should do. The discoloration may not disappear completely, though.
- 31
3
votes
Accepted
How to fix sticky plastic?
This is a problem that has been discussed on Korg forums:
Where to get replacement joystick bezel and LCD bezel?
As many have noted, the joystick bezel and the bezel around the LCD on the PA3x have a ...
- 4,495
3
votes
How to restore transparency of scotch tape? Information is now hidden behind said tape
No.
The polypropylene tape has not lost its transparency although it may appear discoloured. Furthermore, no known lifehack will restore the printed image.
It will not now be possible to read the ...
- 14.1k
2
votes
How to separate plastic grocery bags?
Look at the edges of the bag. Don't mess with the end of the bag where the opening is. The edges are often folded in an accordion-like way. If you put the edge between your fingers and rub, you can ...
- 151
2
votes
How to separate plastic grocery bags?
I struggle with this, and will not lick my fingers, etc.
I bought some Silicone Key Wraps, and put an extra one on my key chain.
I just rub that silicone ring down on the bag, and POOF, it separates ...
- 21
2
votes
How to separate plastic grocery bags?
I realized today after a friend's post about this that my method seems uncommon yet easy. I see only one person mentioned it among other methods within their post.
Put the bag flat between hands with ...
- 21
2
votes
Accepted
How to repair a dent on my water bottle?
Fill it with sand, salt, sugar, or some other granulated material. Use a dowel to pack it down. With enough pressure in the correct area, the dent will pop out.
- 4,338
2
votes
Cheap way to get a clear plastic coffee table? For lying underneath it and using a windows 8.1 tablet on top
Consider something like this instead.
Most are fairly light, or have wheels for easy moving.
It's not glass, so you won't have to worry about glass shards.
Most I've seen cost under 100$. Can be ...
- 2,060
2
votes
Remove an imprinted logo from an electric device
The logo appears to be printed to the underside of the bezel. You would need to remove the outer layer of the screen and replace the coating with something all black. An RC hobby shop would have ...
- 441
2
votes
How to repair a dent on my water bottle?
Put the empty bottle with lid on in the freezer. After a few hours, take the bottle out and put it in the hot sun. The pressure of the expanding air hopefully will pop the dent out.
2
votes
How to repair a dent on my water bottle?
I found that just blowing compressed air into the bottle will expand the area you want to its original shape.
- 31
2
votes
Accepted
Remove ink from coroplast
It depends on the type of ink.
Some inks are soluble in alcohols, e.g. ethanol or isopropanol (use at least 70% or stronger to try to remove the ink).
Some inks are soluble in non-polar solvents, ...
- 5,993
2
votes
How can I make my mouse clicks louder?
You can use AutoHotKey to add a sound to every mouse click.
~LButton down::SoundPlay, E:\sounds\ldown.wav
Check out the Key List to find the names of the keys. I believe they are LButton, RButton, ...
- 6,284
2
votes
Dirty mouse of dried cream
Same as any other electronics.
Buy some low percentage rubbing alcohol, 70% or so, and soak the whole thing for about 20 minutes. Rubbing alcohol is not conductive.
Buy a gallon of distilled water. ...
- 21
2
votes
Accepted
How to fix the broken plastic of headphone/earphone wires?
Use heat shrink instead of tape. That won't slip around after it shrinks around the damaged area.
- 906
2
votes
Checking microwave proof containers
Polypropylene plastic (abbreviated as PP) and designated as a type "5" (shown embossed in the container mold as a "5" inside a recycle triangle) is classified as a microwave oven "safe" plastic.
- 14.1k
2
votes
I can’t change this plug. How to open it while keeping it’s shape?
Here is the way I repaired my vacuum cleaner polarized power cord moulded nylon and rubber plug that needed repair. A replacement (from Sweden - I'm in Quebec, Canada) was over $110 plus 15% ...
- 14.1k
Only top scored, non community-wiki answers of a minimum length are eligible