Skip to main content
4 votes
Accepted

Monochrome printing with non-black ink?

Non-repro blue lifehack: I'm told that nothing is impossible if you can get someone else to do it. Based on your experience, you have already discovered that you can use blue-only prints to use as ...
Stan's user avatar
  • 14.2k
4 votes
Accepted

How to reduce the noise of the mini printing machine?

Many, if not most, minimalist printers are manufactured to keep material cost low for competitive pricing and so do not have any more costly provision to be silent in operation. Fan noise tends to be ...
Stan's user avatar
  • 14.2k
3 votes

How to remove bonded-printed content from a ripstop fabric?

The rubberized printing responds well to several applications of felt marker. In your case, choose a permanent marker in dark blue. Use a hatching stroke at 45 degree angle to completely cover the ...
John Canon's user avatar
2 votes

How to prevent an inket printer from clogging up from lack of use?

I fought this same battle for years. In the end the cheapest and easiest solution was to change to a 'monochrome laser all-in-one' I tossed out much more money in dried up ink over the years, then ...
James Jenkins's user avatar
2 votes

How to prevent an inket printer from clogging up from lack of use?

The best remedy for clogging is to perform periodic maintenance by taking your vehicle out on the road to clean out the cobwebs every once in a while. Note: I have a supply of shopping list paper (...
Stan's user avatar
  • 14.2k
1 vote

How to reduce the noise of the mini printing machine?

In addition to the good answer from Stan you could find somewhere to stand the printer that deadens the sound, for example a small piece of carpet underneath. A table top often amplifies the noise of ...
Weather Vane's user avatar
  • 4,665

Only top scored, non community-wiki answers of a minimum length are eligible