Timeline for Moving huge quantity of salt
Current License: CC BY-SA 3.0
4 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Oct 29, 2017 at 9:54 | comment | added | Stephie | The main disadvantage of a hoist or block & tackle setup in this scenario is the fact that depending on the steepness of the stairs there is not just the vertical, but also a significant horizontal distance to be covered. For trap doors or lifting the sacks along the exterior wall of the building this would be the best answer. For a stairway, it has the aforementioned drawbacks. | |
Oct 21, 2017 at 20:12 | comment | added | Jeremy Nicoll | The hoist (at least my one) when stopped holds whatever is hanging from it at that height. With a block and tackle you also need somewhere that you can tie off the rope so the load stays put, if there's only you doing it, and if you're pulling on the rope from below, unless it has some sort of brake? You have to be able to load the hoist at the bottom then raise it then get upstairs yourself then get the thing off the hoist. It's not as easy as you'd hope. My hoist slides sideways depending on whether my attic ladder is in position or not. | |
Oct 21, 2017 at 19:59 | comment | added | Willeke | Besides using an electric motor for the host, you could use an old fashioned block and tackle, which can often be found much cheaper second hand and allow you to pull up quite big weights with relatively little power. | |
Oct 21, 2017 at 19:50 | history | answered | Jeremy Nicoll | CC BY-SA 3.0 |