Skip to main content
Lifehacks

Return to Answer

correction
Source Link
Bru
Bru
  • 131
  • 1
  • 1
  • 4

If you have to get rid of the dry seal, you have to do it that way.

You have to shorten the structure in the paper again. The seal lenghtend the paper structure.

Using abrasive you can get rid of the seal on one side, but you are then under the smooth paper surface. SoYou are in the structure inside. So mostly you see it. On

On the other side the seal is still there.

If you have to get rid of the dry seal, you have to do it that way.

You have to shorten the structure in the paper again. The seal lenghtend the paper structure.

Using abrasive you can get rid of the seal on one side, but you are then under the paper surface. So mostly you see it. On the other side the seal is still there.

If you have to get rid of the dry seal, you have to do it that way.

You have to shorten the structure in the paper again. The seal lenghtend the paper structure.

Using abrasive you can get rid of the seal on one side, but you are then under the smooth paper surface. You are in the structure inside. So mostly you see it.

On the other side the seal is still there.

Source Link
Bru
Bru
  • 131
  • 1
  • 1
  • 4

If you have to get rid of the dry seal, you have to do it that way.

You have to shorten the structure in the paper again. The seal lenghtend the paper structure.

Using abrasive you can get rid of the seal on one side, but you are then under the paper surface. So mostly you see it. On the other side the seal is still there.